IoT Services
From concept to production-ready connected devices
What we build
We write production-grade firmware for ESP32, nRF52, and STM32 microcontrollers. Our work covers real-time operating systems (FreeRTOS, Zephyr), low-power optimization for battery-operated devices, secure OTA update mechanisms, and robust communication protocols — BLE, Wi-Fi, LoRa, MQTT. Every firmware we ship is designed for reliability in the field, not just on the bench.
From idea to series
Prototyping
Our specialtyThis is our strength. We transform your idea into a functional prototype you can handle, test in the field, and present to investors, in weeks, not months. Quick iterations, minimal constraints, clear technical choices: the prototype answers the only question that counts: does it work, and should you keep going?
Deliverables- Custom PCB, assembled and tested
- Working firmware: sensors, connectivity, OTA updates
- 3D-printed enclosure, fitted to your board
- Integration test report
- Working demonstration and documented source code
- Roadmap to pre-industrialization
Pre-industrialization
A working prototype is not yet a manufacturable product. We revisit every technical decision with production in mind: design for manufacturing (DFM), certifications for your target markets (CE for Europe, FCC for the United States, RCM for Australia, IMDA for Singapore etc.), production partner selection, and the trade-offs between design, dimensions, and legal compliance.
Deliverables- Complete manufacturing package: Gerbers, optimized BOM, assembly drawings
- Certification strategy per target market (CE, FCC, RCM, IMDA…)
- Industrial enclosure design, injection-ready
- Production partner selection and qualification
- Validation pre-series (EVT / DVT) and iteration feedback
- End-of-line test plan
Production
Every device leaves the production line registered, programmed, packaged, and ready for shipping, then it is maintained for years. We build the infrastructure that keeps your fleet operational: secure provisioning, OTA updates, warranty management, and continuous quality control for materials and assembly. Your product isn't delivered just once—it's operated over time.
Deliverables- Secure registration and provisioning of every device
- Firmware flashing on the production line
- Packaging, storage and distribution logistics
- OTA update infrastructure and hardened security
- Warranty and returns management (RMA)
- Continuous quality control: materials, assembly, end-of-line
Transparent budgets
Most agencies make you sit through three meetings before naming a number. Here are our orders of magnitude, phase by phase — freely, before we have even spoken.
A complete working prototype: PCB, firmware, enclosure and tests. A simple connected sensor starts at this price; a multi-sensor device requires more.
- Custom PCB, assembled and tested
- Working firmware with OTA updates
- 3D-printed enclosure
- Documented source code
Prices in USD, excluding project-specific components.
DFM, industrial design, pre-series and certification support for your target markets. Radio complexity and the number of markets drive the budget.
- Complete manufacturing package
- Certification strategy per market
- Injection-ready enclosure design
- Validation pre-series (EVT / DVT)
Excluding certification lab fees, billed at actual cost.
Line setup — provisioning, flashing, packaging, OTA — then a unit cost that decreases with volume. Precise quotation established with you from your target quantities.
- Secure provisioning and flashing
- OTA update infrastructure
- Packaging and distribution logistics
- Warranty and continuous quality control
Unit cost depends on volumes and selected materials.
- Specialized sensors: ECG, infrared, chemical
- Communication protocol and range: BLE, LoRa, cellular
- Waterproofing and outdoor use (IP ratings)
- Custom enclosure and material choices
- Certifications per destination country
- Production quantities
Our senior engineering team is based in Vietnam, right next to Asia's electronics supply chains. We pass this cost structure on to our clients in full: the same standards of rigor as in Singapore or Australia, for a substantially lower budget.
Your estimate in one conversation
Describe your product: we come back to you with a costed estimate and the first technical recommendations.
Indicative, non-contractual ranges, shared as orders of magnitude. Every project receives a detailed quotation after we study your needs.
How we work
Discovery
We dig into your product vision, technical constraints, target market, and timeline to define a clear scope
Design
Hardware architecture, component selection, firmware architecture, communication protocols — all documented before we write a line of code
Prototype
Build, test, iterate. We validate with real hardware and real conditions until the product performs as expected
Deliver
Production files, firmware builds, test procedures, manufacturing documentation — everything your team or factory needs to scale
Industries we serve
Agriculture
Soil and climate sensors, automated irrigation, crop health monitoring, livestock tracking and precision farming at scale.
Industry
Predictive maintenance, real-time production monitoring, asset tracking, automated quality control and factory floor optimization.
Distribution
Cold chain traceability, smart warehousing, fleet telemetry, inventory automation and last-mile delivery visibility.
Health
Patient monitoring wearables, smart clinical equipment, connected care environments and remote diagnostics with medical-grade reliability.
Smart Cities
Environmental sensing, adaptive street lighting, smart parking, water network monitoring and public infrastructure telemetry.
Entertainment
Interactive installations, connected venues, immersive experience triggers, crowd analytics and real-time audience engagement systems.
Technologies
IoT projects delivered
Ready to build?
Let's discuss your technical challenges and find the right solution together.